Chaoyang hongda machinery co., LTD. Welcome you!!
Home>> >> Industry newsIndustry news

What dangers may arise in tile press's work?

Article source:The station Upload time:2022-06-20

Tile press adopts automatic control software to realize production information management. The automation control system of the whole unit uses a highly integrated network to make the automation system work. Although it has brought us many convenient conditions, it will also bring unnecessary troubles if it is not operated properly. For customers who are new to tile press equipment, introduce the use and installation precautions of tile press:


1. Before installation, the head of the unit project shall, in accordance with the requirements of the installation and dismantling scheme of the steel structure tile press, carry out the technical scheme of the scaffold, which shall be signed by both parties.


2. When installing the steel structure tile press machinery, the accumulated error * exceeds the allowable deviation, which is difficult to correct. After each step of scaffold installation, please check the step distance, longitudinal distance, horizontal distance and verticality according to the regulations.


3. Be familiar with the drawings and construction site, master the structural features and environmental conditions of the building plane and elevation, and determine the mechanical steps for pressing steel structure tiles according to the structural requirements of steel pipe technical specifications. Steel structure tile pressing machinery with coupler has specific construction steps.


4. Scaffolding should use a valid species operator certificate. Plastic soled shoes, leather shoes and other hard and slippery shoes are strictly prohibited for climbing. Tools and small parts should be put in tool bags, and the cuffs, neckline and trouser legs of clothes should be tied tightly to prevent the danger of hooking.


There are also dangerous operation trips in the production process in tile press. We must pay attention to the installation of chain box. There must be no chain leakage outside. And when running in tile press, people should not be too close to the discharge port of tile press, so as to avoid unnecessary injuries.


Ceramic tiles produced in tile press are easily injured, so we should pay attention to the width and thickness of ceramic tiles.


In the production process of tile press, the inconvenient part is the haircut. Therefore, I hope we should pay attention to ourselves when using tile press. Operate according to the specified itinerary.